New Lengths in the
Grand Master, Chisel Tooth and the Trigger.
Stud
New Length 1
Part Number
New Length 2
Part Number
Big Nut
Grand Master
1.450"
GMP-1450
1.575"
GMP-1575
YES
Chisel Tooth
1.630"
CAP-1630
1.860"
CAP-1860
YES
Trigger
1.450"
TRIG-1450
1.630"
TRIG-1630
YES
*SKI DOO RUNNER PART NUMBER CHANGES*
TOP STOCK™
EXTENDER III™
TRAIL BLAZER IV™
EXECUTIVE™
HSD-9500
ESD3-9500
TSD4-9500
WSD-9500
The Ski Doo runner part
numbers ending in 9455 and 9550 have been replaced with a part number ending in
9500.
Woody's has runners for USI
and SLY DOG skis!
USI
Ski Configuration
EXTENDER III™
TRAIL BLAZER IV™
EXECUTIVE™
4 Bolt-SS
Tunnelblade
Tunnelight
Tunnelwide
ESI3-1040
TSI4-1040
WSI-1040
5 Bolt-Project X
Project X2
Project PX
Project SPX
ESI3-1050
TSI4-1050
WSI-1050
SLY
DOG
Ski Configuration
EXTENDER III™
TRAIL BLAZER IV™
EXECUTIVE™
Powder Hound Trail
Powder Hound Race
ESL3-3200
TSL4-3200
WSL-3200
Revised Template for Arctic Cat Bear Cats
BEAR-TEMP
This template was originally designed for 2.52 pitch tracks to make a 120 stud pattern for 15" x 151" and a 124 pattern for 20 x 156' tracks. The ability to use the pattern for 16" wide 2.52 pitch tracks has been added and a reconfiguration to include a 62 stud pattern. Check back we'll post this pattern soon.
![Woody's Grand Master[tm] with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track.
The Grand Master[tm] is available in stud lengths of 1.075. with standard nuts and the 1.325 and 1.450 with ALN2-4500 Big Nuts in package in quantities of 12, 48, 84 and 504. The 1.575 has the tall Big Nuts ALN2-7000 in the packages.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align square Grand Digger[tm] support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger[r] support plates.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger[tm] support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger[r] support plates.](/photos/th_Grand-Master_web.jpg)
